| |
 | ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant | | G.992.3(ADSL2), G.992.5(ADSL2+), RE-ADSL compliant | | Rate Adaptive modem at 32 Kbps steps | | Dynamic Adaptive Equalization to improve Carrier’s service area | | Bridge Tap Mitigation support | | ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) | | AAL ATM Attributes - AAL5 | | Multiple PVC up to 8 support (Bridge Support) | | Spectral compatibility with POTS | | F4 & F5 OAM Loop back/Send and Receive | | TR-067 Test Report available | |
|
| RFC2684 Bridge (default) and Routed LLC and VC Mux support | | RFC2364 PPPoA Client support | | RFC2516 PPPoE Client support | | Transparent Bridge Support | | PAP/CHAP/MS-CHAP for Password Authentication Support | |
|
| Static IP support | | Dynamic RIP routing support (with memory and firmware upgrade) | | IP/TCP/UDP/ICMP/ARP/RARP Application Support | | Network Address Translation (NAT) | | Port Mapping/Forwarding | | Easy setup of Port Forwarding rules for popular Games/Application | | NAT Application Level Gateway for popular applications | | DHCP Server/Relay/client | | DNS Relay Agent | | DMZ support | | Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support | | PPP Always on with configurable timeout | | PPP Dial on Demand | | SNTP Support | | IGMP Support (v1 and v2) | | QoS Support (DSCP, TOS) | | PPP/DHCP Auto Detection | |
|
| Web Based HTTP management GUI | | Web Based Firmware Upgrade (Local) | | Soft Factory Reset Button via Web GUI | | Diagnostic Test (DSL, OAM, Network, Ping Test) | | TR068-WAN Access | | Telnet/CLI (Read and Write) | | Syslog Support | | Firmware upgrade-able for future feature enhancement | | SNMP trap | |
|
| NAT for basic Firewall support | | Packet Filtering Firewall Support | | Stateful Packet Inspection Support | | Protection against Denial of Service attacks | | Password Authentication to Modem | | Two-Level Password protection | |
|
| Texas Instrument TNETD7100A2 Single Chip Network Processor/AFE/Line Driver Chipset | | 2 MB Flash ROM | | 8 MB SDRAM | | Dying Gasp | | ITU K.21 Support | | GDT Support | | DSL Forum TR-068 compliant |
| * Feature subject to change | |
|
| For Ethernet :
OS Independent | |
|
| Input Voltage : 9V DC +/- 10% | | Input Current : 1A | |
|
| LED Indicators :
- 1 x "Power" (Green/Red) LED
- 1 x "Ethernet" Link/Activity Status (Green) LED
- 1 x "DSL" Link Status (Green) LED | | External Connectors :
- 1 x RJ-11 Telephone socket for ADSL line
- 1 x RJ45 for 10/100Base-T Ethernet (MDI/MDI-X)
- 1 x DC Jack for Power Input
- 1 x Factory Default Reset Button
- 1 x On/Off Push Button Switch | | Measurements :
- Dimension : 105 (L) x 105 (W) x 30 (H) mm
- Weight : Approx. 250g | |
| Regulatory Approvals (Pending) | |
| Asia Pacific /Europe : CE, IEC 60950 | | Malaysia : SIRIM | | Singapore : IDA (TBC) | | Australia : A-tick/C-tick (TBC) | |
|
| Operating : | 0o to 40 o Celsius
32 o to 104 o Fahrenheit | | Non-Operating : | -25 o to 70 o Celsius
-13 o to 158 o Fahrenheit | |
|
| Operating : | 8% to 95% Relative Humidity (Non-Condensing) | | Non-Operating : | 5% to 95% Relative Humidity (Non-Condensing) | |
